Managed 10/100/1000Mbps Industrial Fiber Switch with CAN and RS485 ( 8 Fiber to 8UTP)

IM-FS880GW-2C4D

The IM-FS880GW-2C4D is a 16-port full Gigabit Layer 2 managed Ethernet switch with CAN bus and RS485. Supporting 2 CAN buses, 4 RS485, 8 SFP fiber and 8 RJ45 ports. The product adopts fan-less, low power consumption, wide temperature and voltage, dual power input, and power polarity-free design. Through strict tests in accordance with industry standards, it can adapt to industrial field environments with strict EMC requirements, and be widely used in industrial control automation, road traffic automation, access control, industrial-grade power distribution systems, closed-circuit monitoring, security systems, POS systems, automatic banking systems, telecommunications systems, banks, insurance systems, building automation systems, large retail systems, network appliances, PLC control systems, smart meter data acquisition, vehicle-mounted communications and other industrial fields.

Quantity

Contact Now

1. 8 x 10/100/1000Mbps Auto-sensing RJ45 ports

2. 8 x 1000Mbps SFP fiber port

3. 2 x CAN Bus and 4 x RS485

4. 1 x Console port, L2+ managed

5. 6KV Ethernet surge protection, adapt to a harsh outdoor environment

6. Support Auto MDI/MDIX

7. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard

8. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant

9. A store-and-forward switching mechanism

10. Operating environment temperature:-40 ° ~75 ° c

Product Name	10/100/1000Mbps Managed Industrial Fiber Switch with CAN Bus and RS485
Model No.	IM-FS880GW-2C4D
Port	8 x 1000Mpbs SFP port SM：1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM：1310nm, 2Km; 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 2 x CAN Bus (Standard frame 11-bit ID, extended frame 29-bit ID, Support J1939, CANopen, DeviceNet and other protocols (firmware configuration required) 4 x RS485 (support TCP/UDP protocol) 1 x Console port (RJ45, Baud rate: 115200)
Standard	IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az
VLAND ID	4096
Jumbo Frame	9.6KB
MAC Address Table Size	8K
Switching Features	Transmission mode：storage and forward System bandwidth：58Gbps (non-traffic jam) DRAM size: 128M Flash size: 16M Packet buffer size: 4Mb
Protocol	IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3z (1000Base-X ) IEEE 802.1D (STP) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) ITU-T G.8032 ERPS Ring IEEE 802.1Q( VLAN) IEEE 802.3x (Flow control) IEEE 802.3ad (LACP) IEEE 802.1p (QoS) IEEE 802.1ab(LLDP) IEEE 802.1az(EEE) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3

L2+ Managed	Supports IEEE802.1q VLAN, port VLAN, based Mac VLAN, IP subnet VLAN, protocol VLAN, VLAN conversion MVR. Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimizes power consumption. Supports STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring (EPR). Supports QoS, transmission classification QoS, CoS, bandwidth control (input/output direction), storm suppression, differential services. Supports dynamic IEEE 802.3ad LACP link aggregation, static link aggregation. Supports IGMP/MLD detection V1/V2/V3, IGMP filtering/adjustment, IGMP query. Supports IGMP proxy report, MLD detection. Security: based on port and Mac IEEE802.1X, RADIUS, ACL. Support IEEE802.3az EEE (Energy Efficient Ethernet) TACACS+, HTTP/HTTPS, SSL/SSH v2. Support Cisco® like CLI, Web network management, SNMP v1/v2c/v3, Telnet. Support software upgrade via TFTP and HTTP, firmware redundancy to prevent upgrade failure. Support RMON, MIB II, mirroring, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP. Support IPV6, ICMP v6NTP/SNTP, TFTP, QOS, ACL. Support SerialCRT、CLI、Telnet、SNMP、HTTP、SSH/SSL
Power Supply	DC12-52V, redundant dual power input and support reverse polarity No-load power: 3.6W Full-load power: 11.2W
CAN Bus	Standards: ISO 11898-2 (high-speed CAN) Communication rate: 10Kbps~1Mbps (configurable) Maximum number of nodes: 110 (default terminal resistance matching) Terminal resistance: 120Ω (optional terminal resistance built-in for each CAN) Isolation protection: Supports 2500V DC isolation (optional) Communication protocol: Supports CAN 2.0A/B, CAN FD Bus voltage range: -3V ~ +32V (anti-surge protection)
RS485	Standards: TIA/EIA-485-A Working mode: Full-duplex or half-duplex (configurable) Communication rate: 115200bps (configurable) Maximum number of nodes: 32 (default) or expandable to 256 (repeater required) Isolation protection: Supports 1500V DC isolation (optional) Bus voltage range: -7V ~ +12V (surge protection)
RS485/CAN Stability	Continuous 72-hour full-load communication test under extreme temperature, communication bit error rate ≤1e-9
LEDs	Power, network, fiber, system
Environment	Working Temp：-40°～ 75°C ; Storage Temp：-40°～ 85°C;Working humidity：10%～90%, non-condensing; Storage humidity：10%～95%, non-condensing
Industry Standards	Ethernet/SFP interface: IEC61000-4-2 (ESD, electrostatic discharge immunity) Air discharge: ±15KV Contact discharge: ±8KV IEC61000-4-4 (EFT, electrical fast transient pulse interference) Signal: ±6KV IEC61000-4-5 (Surge, surge lightning interference) Signal: differential mode ± 2KV Common mode ± 6KV RS485/CAN interface: IEC 61000-4-2 (ESD, electrostatic discharge immunity) Contact discharge: ±8KV IEC 61000-4-5 (Surge, surge and lightning interference) Signal: differential mode ± 2KV