Shenzhen OLYCOM Technology has launched industrial Ethernet series products
author: OLYCOM
2023-06-05
1. 8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber
2. 2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)
3. 4 KV Ethernet surge protection, adapt to a harsh outdoor environment
4. Support Auto MDI/MDIX
5. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
6. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
7. A store-and-forward switching mechanism
8. Operating environment temperature:-40 ° ~85 ° c
9. Support cable diagnosis and can locate the fault point
10. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
11. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
12. Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
13. Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
14. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
15. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
16. Support IGMP agent report, MLD snooping
17. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
18. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
19. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
20. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
21. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
22. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
OLYCOM will attend the SMART NATION EXPO 2023
The industrial fiber Ethernet switch passed the quality inspection of national traffic safety facilities
Related Article
In optical fiber networks, power issues are often a major cause of communication interruptions. This is particularly critical in environments like industrial settings or data centers, where reliability is paramount. A power failure can cause the entire fiber link to go down, disrupting the overall operation of the system. To address this challenge, Olycom's fiber bypass switches with AC/DC dual power input functionality provide an effective redundancy solution.
Power Failures Causing Fiber Link Interruptions? AC/DC Dual Power Ensures Network Stability
The relay alarm function transforms the switch from a network device into a control node
Industrial PoE Switch with Relay Alarm: Enabling Real-Time Response in Critical Networks
90W High Power Output: All 8 copper ports on the Olycom IM-FP21008GW comply with IEEE 802.3bt, delivering up to 90W per port.
Overcoming PTZ Power Deficiencies: Implementing 90W IEEE 802.3bt in Petrochemical Facilities
The Olycom IM-WP054BGE is a 5-port industrial gigabit PoE switch built specifically for solar-powered, off-grid, low-voltage, and harsh-environment networking. Its biggest advantage is the built-in DC voltage booster that unlocks PoE deployment where standard switches cannot function, paired with Web managed capabilities for professional remote control. This combination makes it the most practical solution for real-world off-grid and industrial projects.
How the Olycom IM-WP054BGE Solar PoE Switch Works？